高工作电压小电压可靠性实验仪（耐弧光可靠性实验仪）-（计算出机掌握）

High voltage low current tester (arc resistance tester) - (computer control)

服务种类：耐电弧试验机

Product name: electric arc resistance tester

物品款型：NDH-A

Product model: NDH - A

充分满足条件：GB/T 1411-2002《液体电绝缘的材料耐高压得过低瞬时电流电弧击穿击穿的校正》（一样IEC  61621-1997）及ASTM D495等规格的满足要求定制制做的，并满足IEC 149、UL 746A等实验最简单的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要的支持面积及职能：

本可靠性板材试验机是，并按照广泛应适用于无刷电机、家用电器开关设备和挂式家用电器开关设备等行业领域的低压电工用可PVC、光敏树脂板材胶和隔热层漆等隔热层板材的耐脉冲功能综合评价，主适用于固体颗粒隔热层板材如：可PVC、pe膜、光敏树脂板材、黑云母、瓷器、夹丝玻璃、隔热层油、隔热层漆、硬纸板等媒介的耐脉冲功能测量；

本现场检测机由计算方法机抑制加载，会出现现如今检测情况及检测日期，检测停止后并另存现如今检测动态数据，并可打印机.规范标准实验所申请书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为横竖混合式结构类型，下面为运行装置，顶部为现场实验箱。

2 本產品主要包括*新自动化操纵技木，在选定 程度（IEC或ASTM）可主动使用检验，并在网吧安卓手机表现校正具体步骤和结论。

3 **稳定性顺畅，抗干涉意识强，测式表面粗糙高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断准确时间确定误差：大于 ±10ms

2 调压器出水量：2kVA

3 固定可靠性试验电压值：12.5kV

4 冲击试验相电压精密度：±3%

5 电流值的控制要求：±10%  工作电流量测要求：1.5%

6 参比电极对试板各种压力：（0.5±0.05）N

7 参比电极建筑材料：钨棒

8 探针高度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 的使用室内室内温度因素：（23±2）℃

10 运行生态水分子含量：（50±5）%

11 交流电源：220V±5%  50Hz  10A

12 试验检测    方式方法：   行业标准/美标/10 mA 间断性/20 mA 累计/30 mA陆续/40 mA陆续

13 冲击试验执行程序以下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 產品类型：

NDH-A    耐电弧焊接可靠性试验仪-微机控住

NDH-B    耐电弧焊接试验检测仪-触控屏的控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！